Need help?Do you have a question about the finder 7E.23 Series and is the answer not in the manual?
General| Brand | finder |
|---|---|
| Model | 7E.23 Series |
| Category | Measuring Instruments |
| Language | English |
Shows the electrical connection diagram for the device.
Provides the physical dimensions of the energy meter.
Specifies the accuracy class according to EN50470-3.
Details reference, maximum current, and operating voltage/frequency.
Specifies the counting range and output pulse information.
Details conductor size and connection terminal for main circuit.
Details conductor size and connection terminal for control circuit.
Specifies the operating temperature range for the device.
Defines mechanical and electromagnetic environmental ratings.
Indicates the total energy consumed.
Indicates the total energy fed back to the grid.
Displays the current active power consumption or feedback.
Shows the current voltage level.
Displays the current flowing through the meter.
Pulse output proportional to power consumption.
Emphasizes professional installation to prevent fire or electric shock hazards.
Defines Modbus RTU specifications, Baud rate detection, and parity settings.
Details automatic detection of transmission mode and stop bits.
Specifies maximum bus length and write/read response times.
Information on communication readiness, bus performance, and data refresh rates.
Details on device limits, repeater use, and external terminal resistance requirement.
Supported Modbus instructions, register limits, and broadcast message support.
Describes voltage monitoring and data storage in EEPROM during power loss.
Lists common Modbus exception codes and their meanings.
To Next Page