3
Description of Parts
INSTRUCTIONS FOR USE
Charging Instructions
The speaker comes with a built in rechargeable battery. Before using it for the first time it is
recommended you charge the battery fully.
Connect the USB cable to a computer USB port and the Micro USB plug to the charging slot of
the speaker(2). The Red LED illuminates(4) while the speaker is being charged. It takes
around 3-4 hours for the unit to fully charge. When the battery is fully charged the red LED will
turn off. When the battery is low, the Speaker will emits twice beep tones every 30 seconds.
When this occurs, please charge the speaker.
1 ON/OFF switch
2 Micro USB charging slot
3 Line in 3.5mm jack
4 LED Indicator
5 LED light switch
6
“ ” button: Decrease Volume & Previous track
7
“ “ button: Increase Volume & Next track
8
“ ” button : Pause and Restart music
9
“ ” button :Power button & Repair bluetooth
10 LED light
11 “MUTE” function
12
Receiver of remote
To Next Page
Loading...