Setting up your 4 Litre Cooler
1. Remove all the packaging and dispose of responsibly.
2. Lay the appliance on its back (place a soft cloth or towel underneath to prevent
any damage to the unit).
3. Push the Castors (9) into the base of the cooler.
4. Place the unit upright onto its castors in a suitable, solid, level position.
Operating Instructions
Insert the mains plug (with dry hands!) into
the nearest socket.
Fan Only Mode
To operate the unit in fan only mode prese either the Low (14), Med (15) or the
High (16) Fan Speed buttons to select the desired speed of the fan.
Press the OFF button (13) to switch off the fan.