Why Finlux FLX106CF120 is not intaking water?
If your Finlux Washer isn't taking in water, start by checking if the water tap is turned on. Also, inspect the water inlet hose to ensure it isn't twisted; untwist it if necessary. Next, check for any clogs in the water inlet hose or the inlet filters and clean them. Finally, ensure that the machine door is completely closed.
What to do if my Finlux FLX106CF120 does not discharge water?
If your Finlux Washer isn't discharging water, the drain hose might be clogged or twisted, so check and clear or untwist it. Also, the pump filter could be clogged, requiring cleaning. In addition, ensure that the laundry isn't too tightly packed inside the drum; spread it out evenly.
How to stop my Finlux Washer from vibrating?
If your Finlux Washer is vibrating, it could be due to several reasons. First, make sure the feet of the machine have been properly adjusted. Check to see if the transit bolts, used for transportation, have been removed. Avoid overloading the machine with laundry, and ensure that the laundry is spread evenly inside the drum. Lastly, ensure the washing machine is not placed on a hard surface.
How to fix excessive foam in Finlux FLX106CF120 Washer detergent drawer?
If you notice excessive foam in the detergent drawer of your Finlux Washer, it's likely due to using too much detergent or using the wrong type. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 litre of water and pour it into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Ensure you only use detergents specifically produced for automatic washing machines.
Why is my Finlux Washer giving unsatisfactory washing results?
If you're getting unsatisfactory washing results from your Finlux Washer, the issue could stem from a few factors. If the washing is too dirty for the selected program, choose a more appropriate program using the information in the program tables. Also, ensure you're using enough detergent as instructed on the packaging. Finally, avoid overloading the machine, making sure you don't exceed the maximum capacity for the program you've selected.
What to do if my Finlux FLX106CF120 is giving unsatisfactory washing results because of hard water?
If you're getting unsatisfactory washing results from your Finlux Washer, and you have hard water, try increasing the amount of detergent, following the manufacturer’s instructions. Also, make sure your laundry is spread out in the drum.
Why water discharges as soon as my Finlux Washer is loaded?
If water discharges as soon as your Finlux Washer is loaded, it indicates that the end of the water drain hose is too low. Ensure the drain hose is positioned at a suitable height.
How to remove detergent residue from laundry after washing in Finlux Washer?
If your laundry has detergent residue after washing in your Finlux Washer, it may be due to non-dissolving particles in some detergents appearing as white spots. Try performing an extra rinse cycle or cleaning your laundry with a brush after it dries.
Why grey spots appear on laundry after washing in Finlux Washer?
If grey spots appear on your laundry after washing in your Finlux Washer, it's likely due to untreated oil, cream, or ointment present on the items. In the next wash, use the amount of detergent as instructed on the packaging.
Why the spin cycle does not take place in my Finlux FLX106CF120?
The spin cycle in your Finlux Washer may be delayed or not occur if the Unbalanced Load Control system has been activated. This is not a fault. The system will attempt to redistribute the laundry, and the spin cycle will commence once the load is balanced. For future washes, ensure you load the drum evenly.
Safety advice on ambient temperature, foreign objects, first wash, detergent use, and general precautions.
Guidelines for safe operation, installation by authorized agents, and child usage permissions.
Information on packaging materials and their environmental friendliness, including recycling.
Tips for efficient machine use, focusing on load capacity and avoiding pre-wash for lightly soiled laundry.
Identifies the main external parts of the washing machine with numbered labels.
Details electrical, pressure, power, capacity, and dimension specifications of the appliance.
Instructions to remove transit bolts before first use to prevent vibration and malfunction.
How to level the machine using adjustable feet for stable and silent operation.
Requirements for connecting the machine to the mains power supply, including voltage and amperage.
Steps to connect the water supply hose, including pressure, temperature, and tap connection details.
How to connect the drain hose correctly to a standpipe or sink, ensuring proper height.
Identification of the detergent drawer and its main compartments.
Detailed explanation of the function of each compartment in the detergent drawer.
Instructions on how to select wash programmes using the programme dial.
Explanation of the symbols and indicators shown on the electronic display panel.
Guidance on sorting laundry, checking pockets, and following care labels for best results.
Steps for loading laundry evenly into the drum and ensuring the door is closed properly.
How to add detergent and softener based on laundry type, soiling, and water hardness.
Basic steps to start operating the machine after loading and adding detergent.
How to choose the correct wash programme from the programme table for your laundry.
Explanation of the automatic half-load function and its benefits for saving water and energy.
Overview of extra functions like Delay Timer, No Spin, Anti-Allergic, Easy Ironing, etc.
How to activate and deactivate the child lock feature to prevent unintentional operation.
Steps to cancel a running programme, drain the machine, and select a new one.
What happens when a programme finishes, including removing laundry and post-cycle actions.
Key notes regarding programme duration, detergent use, and specific programme compliance.
Safety precautions to be taken before carrying out cleaning and maintenance procedures.
Instructions for cleaning the water inlet filters to ensure sufficient water intake.
How to remove and clean the flush stopper located in the detergent drawer.
Guidance on cleaning the external casing of the washing machine with mild agents.
Instructions for cleaning the drum and removing rust stains using appropriate agents.
To Next Page
General
