EasyManua.ls Logo

Finlux FXCA FD620TIMDF - Door Open Alarm Function; Freezer Temperature Settings; Temperature Settings Warnings

Finlux FXCA FD620TIMDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 41
Whenever you press this button, a lower
temperature will be set (+8 °C, +6 °C,
eco, +4 °C, +2 °C, or super cool).
If you press the cooler set button until
the super cool symbol appears on the
cooler setting indicator, and do not press
any buttons for 3 second, super cool will
flash.
If you continue to press the same button,
it will restart from +8 °C.
3.3.6 Freezer Temperature Settings
Press the freezer set button once.
When you first press the button, the
previous value will appear on the setting
indicator of the freezer.
Whenever you press this button, a lower
temperature will be set (-16 °C, eco,
-20 °C, -22 °C, -24 °C, or super freez).
If you press the freezer set button until
the super freez symbol appears on the
freezer setting indicator, and do not press
any buttons for 3 second, super freezer
will flash.
If you continue to press the same button,
it will restart from -16 °C.
3.3.7 Door Open Alarm Function
If fridge door is opened more than 2
minutes, appliance sounds ‘beep beep’.
3.4 Temperature Settings Warnings
Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food kept
inside the appliance and the ambient
temperature in the location of your
appliance.
When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
A 5 minute delay function is applied
to prevent damage to the compressor
of your appliance when connecting
or disconnecting to mains, or when
an energy breakdown occurs. Your
appliance will begin to operate normally
after 5 minutes.
Climate class and meaning:
T (tropical): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating
appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This
refrigerating appliance is intended to be
used at ambient temperatures ranging from
10 °C to 32 °C.

Table of Contents

Related product manuals