EasyManua.ls Logo

Finlux FXCA FD620TIMDF - Accessories; Ice Tray (in some Models); The Icematic (in some Models); The Storage Box

Finlux FXCA FD620TIMDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 42
3.5 Accessories
Visual and text descriptions in the
accessories section may vary according
to the model of your appliance.
3.5.1 Ice Tray (In some models)
Fill the ice tray with water and place in
the freezer compartment.
After the water has completely frozen,
you can twist the tray as shown below to
remove the ice cubes.
3.5.2 The Icematic (In some models)
(The images are representative)
Pull the lever towards you and remove
the ice maker tray
Fill with water to the marked level
Hold the left end of the lever and set the
ice-tray on the icebox
When ice cubes have formed, twist
the lever to drop the ice cubes into the
icebox.
Do not fill the icebox with water in
order to make ice. It will break.
3.5.3 The Storage Box
To use for chill drawer department:
If you want to use this compartment as a
chill drawer, you must take the sliding cover
(indicated in the picture) from the closed
position to the open position.
(The images are
representative)
To use for Crisper department:
If you want to use this compartment as a
Crisper, you must take the sliding cover
(indicated in the picture) from the open
position to the closed position.
(The images are
representative)
.

Table of Contents

Related product manuals