2. Safety instructions
The manufacturer's safety requirements are as follows:
• The operating and maintenance personnel must have all operating and maintenance instru-
ctions readily available, and they must be understood and followed. The owner of the machine
shall ensure that this is done.
• The operating and maintenance personnel must be appropriately trained, and they must have
read the instructions before performing their tasks.
• The operating and maintenance personnel must also have read the instructions for all other
equipment or components included in the delivery.
• The operating and maintenance personnel must be appropriately skilled and trained in their
tasks.
• The operating and maintenance personnel must be comprehensively trained in all operating
and maintaining procedures related to the delivered unit.
• The operating and maintenance personnel must observe local laws and regulations.
• The operating and maintenance personnel must use only approved and inspected lifting and
hoisting equipment.
2.1. Hazard levels
The term DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
The term WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
The term NOTICE indicates a hazard with a risk which, if not avoided, could
result in property damage.
2.2. Safety symbols
Warning
A yellow triangle with a black border and black symbol indicates danger.
Prohibition
A round sign with red border, cross-line and black symbol indicates that the
action in question is prohibited.
Compulsory action
A blue circle with a white symbol indicates that the action in question must
be carried out in order to avoid hazard.
User Guide - E5 Turret Punch Press
6 (46)
To Next Page
Loading...
