Doc# 71-0170 4215-141
Rev. 02 3 08/23/2022
Receiving Shipment
Please immediately check for any hidden damage that may have occurred
in shipping. If any damage is found, you must notify the delivering carrier
within seven days.
Taking a few minutes with the following instructions will ensure quick and
proper assembly, and many years of enjoyment and relaxation. By
reviewing all the instruction steps ahead of time, you will have a better
feel for the entire process.
Your sauna package will arrive on a stretch-wrapped pallet including a
stack of prebuilt panels, benches, and boxes with the heater
Hardware Package
▪ Bag of 1 1/2” Screws
▪ Bag of 3” Screws
▪ Torx Bit
▪ 2 Carriage Bolts w/ Washer and nut.
* Screws are specially coated to not react with cedar or pressure treated wood.
Tools Required
• Hammer or brad nailer
• Handsaw or miter box (trim molding installation)
• Cordless Drill
• Tape measure
• Square
• Level
• 3/8” wood bit (if sauna room has an L-bench)
• Torx bit (provided)
• Shims
• Phillips screwdriver
• Finishing Nails
• 100% Silicone Caulking
To Next Page
Loading...
Need help?
General