Fireboy- Xintex CMD-4M User Manual

MODEL: CO SENTINEL
CARBON MONOXIDE ALARM FOR MARINE USE
CMD-4M CMD-4M-RLY
CMD-4MR CMD-4MR-RLY
UL 2034 Listed Unit
Installation and Operation Manual
Made in U.S.A.
IMPORTANT: READ THIS MANUAL CAREFULLY. SAVE FOR FUTURE
REFERENCE. KEEP THIS MANUAL WITH THE CO SENTINEL.
!WARNING!
There are no user or field serviceable parts in this product. The CO Sentinel must be
returned to the manufacturer for any repair or performance checks. Installation shall be
done by qualified personnel authorized to do so by the authorities having jurisdiction for
the particular application in which the product is being used. Electrical wiring shall be in
accordance with applicable codes. Improper wiring may render the unit inoperable,
damage components, or cause a fire, and will void all warranties.
This carbon monoxide alarm is designed to detect carbon monoxide gas from ANY
source of combustion. It is NOT designed to detect smoke, fire or any other gas, unless
the product has been investigated and determined to comply with the applicable
requirements. To function as intended, the CO Sentinel must be connected to a correct
power source, and for maximum effectiveness, be powered at all times. Do not install
outdoors. Not for use in aircraft.
Rev. 3.0, 08/06
P/N 18236

Fireboy- Xintex CMD-4M Specifications

General

Brand	Fireboy- Xintex
Model	CMD-4M
Category	Carbon Monoxide Alarm
Language	English

Summary

Important Safety Information

General Warnings and Manual Handling

Crucial warnings regarding product usage, installation, and potential hazards. Keep manual for future reference.

Installation and Operation Basics

Device Components and Indicators

Identifies unit components like power indicator, horn, and test/silence button for proper placement.

Understanding Carbon Monoxide Risks

Explains carbon monoxide, its sources, and its dangerous, undetectable nature for user awareness.

CO Exposure Symptoms and Effects

Marine Environment CO Hazards

CO Sentinel Operational Mechanism

CO Sentinel Model Features

Standard Model (CMD-4M/CMD-4MR) Features

Outlines features of CMD-4M and CMD-4MR models, including self-diagnosis and sealed circuit board.

Deluxe Model (CMD-4M-RLY/CMD-4MR-RLY) Features

Describes interconnectivity for deluxe models and relay output capabilities for generator shutdown.

Installation Guidelines and Placement

Recommended Marine Installation Points

Advises on installing the CO Sentinel in marine cabins and sleeping areas for optimal protection.

Locations to Avoid During Installation

Lists specific locations to avoid for CO Sentinel installation to ensure accurate detection and prevent damage.

Mounting and Securing the Unit

Wiring and Interconnection

Wiring Standard CMD-4M(R) Models

Details wiring instructions for CMD-4M(R) using 18 AWG wire to a 12V source and ground.

Wiring Deluxe CMD-4M(R)-RLY Models

Explains interconnect wiring for CMD-4M(R)-RLY and relay wiring for generator shutdown control.

Operation and Maintenance Procedures

Test/Silence Button Usage and Status Indicators

Describes how to use the test/silence button and explains system status indicators and audible alarms.

Cleaning and Unit Maintenance

Advises on weekly cleaning without solvents to maintain alarm functionality and performance.

Emergency Response Actions

Managing Nuisance Alarms

Operational Limitations and Disclaimers

Specifications and Services

Key Technical Specifications

Provides detailed technical data including voltage, current draw, temperature limits, dimensions, and warranty.

Factory Re-certification and Warranty Renewal

Details the factory re-certification and warranty renewal service, including costs and procedure.

Warranty Terms and Conditions

One Year Limited Warranty Coverage

Outlines the terms of the one-year limited warranty, exclusions, and consumer rights.