EasyManua.ls Logo

Fireboy- Xintex CMD6-MDR-B - Alarm Operation; Status Indicators and Explanations

Default Icon
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Part Number 18160, F, 06/29/2021
Operation of Fireboy-Xintex Carbon Monoxide Alarm(s)
Should a very high level of carbon monoxide exist, the CO Alarm will alarm in a few minutes.
However, if small quantities of CO are present or high levels are short-lived, the micro controller
will accumulate the information and determine when an alarm level has been reached. This
feature eliminates nuisance alarms. For example, in a boat it is possible to see high levels of CO
for a very short time such as when docking or maneuvering. The CO Alarm takes this all under
consideration by totaling the quantity of CO detected over a period of time.
The CO Alarm is programmed to alarm at a COHb level of 10%. Alarm points are 70 ppm (60-240
minutes), 150 ppm (10-50 minutes), and 400 ppm (4-15 minutes). Alarm will clear when the CO
level drops below 40 ppm.
Status Indicators and Explanations
SYSTEM
Red LED
AUDIBLE
STATUS
INDICATOR
HORN
Normal:
Off
Off
Alarm:
1 Flash/5 sec.
4 Beeps, 5 sec. Silence
Remote Alarm:
1 Flash/5 sec.
4 Beeps, 5 sec. Silence
End of Life
1 Flash/5 sec.
1 Beep/60 sec.
Power Indicator
Alarm Indicator
Horn
Test/Mute Button

Related product manuals