Need help?Do you have a question about the FireClass FC490ST and is the answer not in the manual?
Explanation of symbols used for warnings and information.
Guidance on choosing commands via the menu.
Defines the target audience for the manual, focusing on technicians.
Overview of the FC490ST Loop Service Tool's capabilities and connections.
Details dimensions and materials of the device.
Information on battery type and operating time.
Specifies operating and storage temperature, and humidity limits.
States compliance with EU EMC Directive 89/336/EEC.
Instructions for installing, replacing, and charging the device's batteries.
Details the 6-digit password entry and consequences of incorrect attempts.
How to physically connect detectors and ancillaries to the FC490ST.
Best practices for connecting devices to avoid interference or faults.
Functionality for programming device addresses and managing the address map.
Lists available menu functions and their corresponding actions.
Lists device models and their associated type values.
Measures temperature in Celsius and Fahrenheit for compatible detectors.
Measures CO levels in parts-per-million (PPM) for CO sensing detectors.
Performs combined tests (R1, L2, Selftest) on detectors and reports results.
Assesses the contamination level of the optical chamber in percentage.
Displays the unique value associated with each addressable device model.
Displays the status of digital inputs in binary and decimal format.
Allows setting the digital output of addressable devices.
Covers device polling, low battery indication, LCD backlight, and auto power off.
Procedure for resetting the FC4905T using a pinhole switch.
Lists available accessory kits and their components.
Lists part numbers for spare ancillary leads and pins.
Provides further details on menu functions and device type IDs.
Lists available menu functions and their corresponding actions.
Lists device models and their associated type values.
To Next Page
General