4.1 ADDRESS PROGRAM FIRECLASS FC490ST
14 User Manual Doc. version 2
CPU RESET
If the buttons or display are not responding correctly, the
FC490ST may be reset. This is done by pushing a small
jewellers type screwdriver into the pinhole on the bottom of
the FC490ST to actuate a switch.
When a CPU reset is carried out, the FC490ST will start up
as described in 3.2 “Password Protection”.
4.1.10 Ordering Information
Accessory Kit : 516.800.923
Consisting of:
Carry case
Car lighter adaptor
Shoulder strap
4.1.11 Spares
Spare ancillary lead : 516.800.922
Ancillary lead spare pins (bag of 10) : 516.800.924
CPU Reset
This function is not normally used.
To Next Page
Loading...