• Do not stare directly into the beam (red or green light source) or
view directly with optical instruments or set up the laser at eye level
• Do not disassemble the laser tool. There are no user serviceable
parts inside.
• Do not modify the laser in any way. Modifying the tool may result
1n hazardous Laser Radiation Exposure
• Do not operate the laser around children or allow children to
operate the laser. It may result in serious eye injury.
• An exposure to the beam of a Class 2 laser is considered safe
for a maximum of 0.25 seconds. Twinkling eyes will normally
provide adequate protection. Exposure to a laser beam for an
extended time may be hazardous or do harm to your eyes.
• Glasses may be supplied in some of the laser tool kits. These
are NOT certified safety glasses. These glasses are ONLY used
to enhance visibility of beam in brighter environments or at farther
distances from laser sou.