• Do not store the laser tool in direct sunlight or expose it to high
temperatures. The housing and some internal parts are made of
plastics and may become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth.
Although these parts are solvent resistant, NEVER use solvents.
Use a soft, dry cloth to remove moisture from the tool before
storage.
• Do not dispose of this product with household waste
• Please recycle in line with local provisions for the collection and
disposal of electrical and electronic waste under the WEEE
Directive.
Troubleshooting
Q:Laser line is not projected.
A:No batteries installed, batteries installed incorrectly or batteries
are depleted. Try to install new batteries correctly.
Q: Laser line flickers for alert.
A:The surface where the tool has been placed is uneven or the
tool is out of its automatic self-leveling range. Try to place the tool
< 8 >
To Next Page
Loading...