UserGuide,MaintenanceandCare
• The laser tool is sealed and calibrated at the plant to the
accuracies specified.
• It's recommended to do accuracy check before its first use and
periodic checks during future use especially for precise layouts
• When not in use please power OFF the tool and keep the
pendulum locked in its locked position.
• In Manual Mode, self leveling is OFF. The accuracy of the beam
is not ensured to be level.
• Do not short any battery terminals or charge alkaline batteries or
dispose of batteries in fire. Always dispose of batteries per local
code.
• Do not mix old and new batteries. Replace all of them at the
same time with new batteries of the same brand and type
• Keep batteries out of reach of children.
• Store the tool in its case when not in use. Remove batteries if
the tool will not be used or stored for extended time for several
months.
To Next Page
Loading...