Generator Controls
The Generator display will show the total
number of generator hours accumulated
as well as the current operating status
(running or stopped). Generator hours
are saved to the system, not to the
generator itself. Press and Hold the hours
display for 3 seconds to enter the Set Gen
Hours screen. Type in the required gen
hours and tap Yes to accept and exit.
Power Cycle the coach to ensure that your
preference has saved.
Gen Start – Ensure that the red button on
the generator remote is depressed before
continuing.
Press and Hold to start the generator.
Please note that the generator requires a
press and hold because it operates on a
one-second delay as a safety feature to
help prevent accidental generator starts.
Gen Stop – Press and hold to stop the
generator.
To Next Page
Loading...
Need help?
General
