Notice: Make sure that Bluetooth is turned ON in your smart device
settings before proceeding.
Locate the Login Information:
The login information can be
found by clicking on the Mobile
App button on the settings page
of the touchscreen or from the
Mira module’s label.
Download:
Download Vegatouch Mira from the Google Play store or the App Store. Once the download
has finished, install the app and open it.
Setup:
Tap SCAN to find the Mira Module’s signal. After scanning, any Mira Module in your area will
appear on the screen. Tap the ID # that matches the one on your Mira label. Enter the PIN
number from the Mira label and press AUTHENTICATE to connect to the system.
To Next Page
Loading...
Need help?
General
