Remote Control
1. Power indicator When in use, press any button, the red indicator will flash.
2. On / Off
Switches on or off the heater or stands it by.
3. First gear
After turn on the heater, you can choose low heating.
4. Second gear
After turn on the heater, you can choose moderate heating.
5. Third gear
After turn on the heater, you can choose high heating.
6. Timer Off
Switches off the heater in present time and starts stand by mode.
Warning!
Insert the batteries of your remote control.
7.2 Operation of the Remote Control
Inserting Batteries
Insert 2AAA / Alkaline type batteries into your Remote Control.
1- Flip the backside of the remote control and pull out battery cover. Insert the batteries
in accordance with the instructions and polarity of the batteries.
2- Change the batteries in the same way depicted above.
To Next Page
Loading...
Need help?
Power
Remote Control
