Step 3：Press Open/Close second，the digital screen shows P.1，the function of a file
connected
Step 4：Press Open/Close third，the digital screen shows P.2，the function of two file
connected
Step 5：Press Open/Close forth，the digital screen shows P.3，the function of three file
connected
Step 6：After the function is on，1-24 hours timing shutdown can be adjusted arbitrarily，
the digital screen showing 0.1 indicates timing one hour，showing 0.2 indicates timing two
hour.
7. Operating Instructions
7.1 Definitions of the Buttons on the Remote Control
The functions of the heater may be controlled via the buttons on your remote control and
LCD screen. You may also control some of the functions of your heater through the
buttons on the front side of the heater.
To Next Page
Loading...