www.hawkeyefpv.com.cn
Trouble shooting:
1.First of all if the camera has any problems: set it to default
settings first（refer to :
System Setup settings
).
2.if the video quality is not satisfied or if the camra have any problems: try to
set it to default
settings first（refer to :
System Setup settings
).
3.Videos are not smooth : try to set it to default settings first（refer to :
System
Setup settings
)
a.Set the video resolution to :
1080P 60FPS
b.Set Gyro :
ON
c.Change a player(Quicktime player).
4.Battery endurance time is not enough: a.set LCD Brightness to Low; b.turn
off the camera when charging(Press and hold Mode key for 3 seconds could
shutdown the camera)c.Set to Photo mode when standby.d.Auto low light set
ON. d.Turn WiFi OFF.
5.Charging time too long: when charging, press and hold Mode key for 3
seconds to turn the machine power off.
6.Video and sounds are no sync: A.copy the video to computer. B. Change a
player(Quicktime).
7.Can't record/Camera unstable/record and then stop: A.Make sure card speed
is U3. B. Format MiroSD card(One FIREFLY) once. Suggest MicroSD cards:
Sandisk Extreme U3，Sandisk Extreme Pro U3,Sandisk Extreme PLUS
U3,Lexar 1000x U3 ，SONY SR-64X U3
8.Machine is heat. a. Set to Photo Mode when standby. b.take it out of the
waterproof case. c.Not Use it in a sealed environment
9.Camera no response. Take battery off and assemble again.
To Next Page
Loading...
