Need help?Do you have a question about the Firefly Q6 and is the answer not in the manual?
General| Lens | 170° wide-angle lens |
|---|---|
| Photo Resolution | 12MP |
| Video Resolution | 4K/24fps, 2.5K/30fps, 1080P/60fps |
| Display | 2.0-inch LCD |
| Connectivity | WiFi, USB |
| Storage | microSD up to 64GB |
| Waterproof | Up to 30m with waterproof case |
| Battery | 1050mAh |
Displays the current operating mode, such as Video or Photo.
Shows the current date on the status screen.
Indicates the current video resolution setting.
Displays a counter, likely for photos or video clips.
Indicates the status of the Wide Dynamic Range feature.
Shows the current Field of View (FOV) level.
Indicates the current battery charge level.
Used to turn the camera on/off or select operating modes.
Confirms settings or actions within the camera interface.
Navigates menus upwards or selects options.
Navigates menus downwards or selects options.
Selectable resolutions include 4K, 2.5K, 1920*1440, 1080P, and 720p.
Allows starting/stopping time-lapse videos at set intervals.
Records video in 5-minute segments, overwriting oldest files.
Automatically starts recording when connected to USB power.
Enhances detail in dark environments; may cause overexposure in bright conditions.
Supports 16M, 8M, and 5M photo resolutions; 16M is recommended.
Allows rotating the image by 180 degrees.
Enables or disables audio recording for videos.
Captures 11 photos in rapid succession within 1 second.
Captures photos continuously at intervals of 3, 5, 10, or 30 seconds.
Adjusts ISO sensitivity (AUTO, 100, 400, 1600) for better image quality.
Offers High, Medium, and Low sharpness settings for images.
Provides standard and vivid color options for video/photos.
Adjusts exposure level (High/Middle/Low) for detail and brightness.
Configures metering methods: Average, Center, or Spot.
Sets bit rate to High or Low for detail vs. file size.
Allows stamping the time on photos or videos.
Selects between PAL and NTSC video output standards.
Adjusts light frequency setting to 50Hz or 60Hz.
Turns ON to reduce the fish eye effect in recordings.
Turns ON to enable the image stabilization function.
Automatically turns off power 30 seconds after USB supply is cut.
Adjusts angle (Large/Medium) to reduce image distortion.
Enables display of external battery voltage via AV output.
Allows adjustment of the camera's date and time settings.
Formats the TF card to ensure compatibility with the system.
Resumes all factory default settings for the camera.
Displays the current system version of the camera.
Enables or disables the operational beep voice.
Turns the LED light ON or OFF.
Sets exposure times from 0.5S to 60S for light doodle effects.
Maintains frame rate or conserves power based on setting.
Captures slow motion movies and saves them to the TF card.
Connects the control module to power supply (voltage > 5V).
Operation guide for taking photos or recording videos via switch.
Addresses signal issues and pulse width for remote control.
Suggests resetting to default settings for quality problems.
Recommends adjusting resolution, frame rate, gyro, and player.
Suggests turning frame rate first OFF if battery endurance is low.
Instructs to turn off the machine during charging.
Recommends copying to PC and using a different player if out of sync.
Ensures C10 card speed and suggests TF card formatting.
To Next Page
