Need help?Do you have a question about the Firefly 6s and is the answer not in the manual?
General| Camera Resolution | 16MP |
|---|---|
| Display | 2.0 inch LCD |
| Field of View | 170 degrees |
| Wi-Fi | Yes |
| Waterproof | 30m with waterproof case |
| Storage | Micro SD card up to 64GB |
Diagram labeling the external physical parts of the camera.
Explains the icons and information displayed on the camera's OLED screen.
Details technical specifications including resolution, ports, Wi-Fi, and battery life.
Details the functions of the Power/Mode, OK, UP, and DOWN buttons.
Explains available video resolution options and their parameters.
Instructions for starting/stopping time-lapse video at set intervals.
Describes cycle recording mode and its use in vehicle monitoring.
Explains the auto-record function when connected via USB.
Guidance on using the Wide Dynamic Range feature in different lighting conditions.
Lists and suggests photo resolution settings (16M, 8M, 5M).
Details burst photo (11 photos/sec) and continuous photo modes.
Explains ISO adjustment (AUTO-1600) and sharpness levels (High/Medium/Low).
Describes color adjustment (standard/vivid) and time stamping options.
Specifies the available TV output modes: PAL / NTSC.
Details using the Wi-Fi remote feature to connect to smart devices.
Explains the auto power-off function after USB power is cut.
Describes angle adjustment options (Large/Medium/Small) for image distortion.
Instructions for formatting the TF card if it does not fit the system.
Guidance on resuming all factory default settings for troubleshooting.
Explains the 50Hz/60Hz light frequency setting.
How to turn ON the function to reduce the fish eye effect.
How to turn ON the image stabilization function.
Instructions for downloading and installing the FIREFLY app for remote control.
Steps to connect your smart device to the camera's Wi-Fi network.
How to control the camera and manage content via the FIREFLY app.
Explains how time is updated automatically when connected to Wi-Fi.
Guidance on charging the camera battery using a USB cable.
Steps to connect the camera to a computer and transfer photos/videos.
Instructions for connecting the camera via a USB/AV cable.
Instructions for remotely controlling the camera using a transmitter.
To Next Page
