1. Features/Benefits
Wide Application Ranges
Full Consideration for Noise Control
The Thermal Master Series is designed for
Compressor rubber feet are specially selected for
domestic hot water for a houses, as well as small
reducing vibration. Specially, compressor sound
commercial buildings such as small hotels, jacket is available for every unit. Well-balanced
offices, schools, hospitals, apartments etc. The fans and fan motors, with the optimized fan
holder, contributes to the low noise operation. The
hot water outlet range is wide from 20 to 60 ,
cabinet inside is insulated to reduce noise
meeting demands for most hot water project. The
transmission.
performance is at wide ambient temperature
range from -10~43 . Modular control system is
Reliable Design and Strict Quality Control
available to meet the demand of bigger hot water
Standard safety features for the refrigerant circuit
projects.
include high-pressure switch and low-pressure
Assuring You Get Grants from Government
switch to detect loss of refrigerant, as well as
Designed for high efficiency performance over a
deficient water flow. Equipment safety features
lifetime of operation. The annual average COP is
include water loop temperature monitoring,
up to 4.5. The water pipes and refrigerant pipes
voltage protection, water coil freeze protection.
are well insulated to minimize the heat loss.
All safety features are tested and run at the factory
to assure proper operation of all components and
Durable and Long Life
safety switches.
High efficiency compressor for all units, with
All components are carefully designed and
durable features against high temperature and
selected for endurance, durability, and carefree
high pressure for long life. The tube in shell heat
day-to-day operation. Each unit is fully tested in
exchanger are durable for anti-corrsion, hard
performance and safety before exit factory.
water, high pressure and unexpected freeze
caused by power cut-off.
Simple Maintenance and Serviceability
Full access for maintenance or service is provided
Strong Cabinet
from the maintenance panel, for better flexibility in
Standard unit fabrication consists of heavy gage
confined space. Easy removal of the control box
galvanized sheet metal cabinet construction that
from the unit provides access to all refrigerant
provides maximum strength. All interior sheet
components. The refrigerant circuit is easily
metal surfaces are powder-painted for maximum
tested and serviced though the use of high and
corrosion protection to ensure resilience for long
low pressure ports integral to the refrigerant
term vitality. Compact, stackable cabinets are
circuit.
designed to minimize installation space.
° °
C C
°
C
Hot Water Series
1
The installation, commissioning and wires are apart from hot or moving parts [eg:
maintenance of the system should only be done compressor, fan] of the system to avoid
by qualified personnel with adequate knowledge damage to the wires.
of the relevant standards and local regulations as
Anti-freezing measures must be well done to
well as experience with similar systems.
avoid damage to the water system and the heat
pump water heat exchanger.
Please make sure the water flow is sufficient all
the time.
Please make sure the lifting and transportation
are safely done according to the heat pump
All ground line connections must be prepared in
size and weight.
accordance with relevant local regulations.
It is very dangerous work done at the facility
To reduce the risk of electrical insulation faults,
without previously cutting off the electricity from
you first make the connection of the protective
the main power source.
conductor of the heat pump safe according to
local regulations.
When installing the system, please ensure that
no contaminants enter the water cycle.
When installation, make sure that the inside
2. Notes/Precautions
■
■
■
■
■
■
■
■
■
To Next Page
Loading...
Need help?
General
