3
1
Set the water outlet temperature as follows:
Hot Water Series
17
Press and for 3~5 seconds
till “Bee~~!!” sound heard; and the
temperature value flashes.
Press or to adjust
the water outlet temperature.
Flashing
Press and for 3~5 seconds
to save the setting.
Press or to check the
parameter, please choose “1"
(0~11) for water tank temperature
setting (see “1" on the above
picture).
NOTICE
During parameter setting, if no operation for more than 8 seconds, the interface of the controller panel
will automatically back to the main view.
Press ON/OFF key and Mode key will defrost forcedly.
The water outlet temperature of the domestic hot water heat pumps is set
with 55~60℃ before delivery in factory.
It is suggested to be 55℃ for expanding the working life of the compressor
and whole system.
IMPORTANT
To Next Page
Loading...
