Firehawk CO5B - Wireless Alarm Installation and Testing; Connection and Pairing Procedure; System Test and Verification

Fireblitz Extinguisher Ltd Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.
Tel: 01322 342238 | Fax: 01322 331532 | Email: sales@fireblitz.co.uk | www.fireblitz.co.uk
Fireblitz reserve the right to change the design or specification details without prior notice.
REF: COL&S 09/18
Installation,
pair & test
CONNECTION
1
POSITION & PAIR
2
• Fix alarm to radio base within 15
seconds of pressing the pairing button
• Each alarm will beep TWICE at the
start of pairing
• Repeat steps 1-3 for each additional
alarm, one at a time.
• Each radio base LED will flash green
once per second during pairing
Wait for each alarm to:
1. To beep twice at the END of
pairing (4-5 minutes)
2. To flash the green LED once
per minute on all devices
3. Test the complete system
from every device
TEST SYSTEM
4
ASSEMBLE
3
CO7B (10Y)W
Wireless Carbon
Monoxide Alarms
Switch on the radio base
(plug-in alarm when required)
Take alarm to its working location.
Press the pairing button