1. List of Components
Description of Parts Qty
FX/FP Stove Assembly 1
Door Handle (screws into knob) 1
Multi Tool 1
Ash Pan 1
Flue Spigot Collar 1
Flue Blanking Plate 1
Spigot Collar fixing screws & nuts 3
Blanking plate M6 screws & nuts 3
Stove Operating Glove 1
2. Component Identification and Assembly
Your stove comes packed in a plywood crate. Carefully remove the straps and lift
off the upper crate. Remove any plastic packaging, open the door and remove all
the contents. THE DOOR HANDLE MAY BE PACKED ON TOP OF THE BAFFLE
PLATE – REACH THROUGH THE TOP SPIGOT OPENING TO FIND IT. See List of
Components section and check contents carefully.
2.1 To remove the baffle plate, first remove the two stainless steel side firebox liner clips
by lifting them above the fuel retainer. Remove the two firebox side liners. Now
remove the firebox rear liner. Handle & store very carefully to one side where they
will not get broken.
2.2 Remove the front fuel retainer by lifting up and rotating until it can be lifted through
the open door of the firebox.
To Next Page
Loading...
