To Next PageTo Next Page
Need help?Do you have a question about the Fireline PUREVISION and is the answer not in the manual?
Guidance for installing and operating the Purevision stove.
Details on exemption for burning wood in smokeless zones under the Clean Air Act 1993.
Lists all parts included with the Purevision stove for identification.
Details on identifying and operating the stove's various components and controls.
Steps to prepare the stove before commencing installation procedures.
Information and requirements for installing the stove correctly and safely.
Crucial warnings and general safety guidelines for stove installation and use.
Provides technical specifications and performance declarations for the appliance.
Detailed instructions for operating the Purevision stove safely and efficiently.
Instructions for routine maintenance and servicing of the stove.
Detailed physical dimensions for different Purevision stove models.
Answers to common questions regarding stove installation, operation, and maintenance.
Crucial warnings and general safety guidelines for stove installation and use.
Specific warnings related to chimney installation and compatibility for the stove.
Caution regarding the use of extractor fans in the same room as the stove.
Instructions on regular cleaning and chimney sweeping procedures for the appliance.
Information on recommended and prohibited fuels for safe and efficient stove operation.
Essential requirements for adequate ventilation for safe stove operation.
General precautions to ensure compliance with Health & Safety at Work act during installation.
Guidelines for safe handling and lifting of the heavy stove unit.
Specifications for chimney height, condition, and flue diameter for optimal performance.
Details on ventilation needs based on appliance output and building regulations.
Information on connecting a direct outside air supply for combustion.
Required flue draught levels for satisfactory appliance performance and potential issues.
Guidance on connecting the stove to existing or new chimney systems.
Safety distances required between the stove and combustible/non-combustible surfaces.
Requirements for hearths, including thickness and apron dimensions.
Information on available accessories and the recommendation to use genuine parts.
Final steps including CO alarm fitting, initial fires, and customer handover.
Table detailing appliance weight, packed/unpacked, and approximate output ranges.
Test results for efficiency, emissions, and temperatures when burning wood.
Test results for efficiency, emissions, and temperatures with smokeless fuel.
Summary of safety distances from combustible side and rear walls.
Essential safety guidelines for operating the stove, including fireguards and modifications.
General warnings about stove operation, including door use and hot surfaces.
Explanation of the Clean Air Act and its implications for stove use in designated areas.
Detailed guide on using primary, secondary (air wash), and tertiary air controls for different fuels.
Instructions for cleaning the glass, outer body, inner firebox, and baffle.
Information on recommended fuels and warnings against prohibited fuels.
Specific guidance for burning wood, including refuelling and log placement.
Guidance on burning Ancit and other smokeless fuels for optimal performance.
Step-by-step instructions for safely lighting the stove and curing the paint finish.
Procedures for re-fuelling with wood and smokeless fuels, including common issues.
Instructions on how to safely shut down the stove after use.
Weekly checks and maintenance tasks for the user to perform.
Procedure for removing the stove's top plate for access or adjustment.
Instructions on how to remove the stove door from its hinges.
Steps for removing or inspecting the baffle plate for cleaning or maintenance.
Procedure for removing firebox liners and the fuel retainer assembly.
Steps for removing the riddling grate and associated components.
Instructions for removing the flue spigot collar for configuration or maintenance.
Procedure for removing the outer casing panels of the stove.
Guide to adjusting the door hinges for proper alignment and sealing.
Instructions for fitting the air limiter bracket for use in smoke control zones.
Procedure for accessing and maintaining the air control valve and surrounding components.
Diagrams and measurements for the Purevision 5kW stove model.
Diagrams and measurements for the Purevision 5kW Wide stove model.
Diagrams and measurements for the Purevision 8.5kW stove model.
Answers regarding the necessity of chimneys or liners for stove installation.
Information on how to clean the chimney and required access.
Recommendation for using a qualified installer (e.g., HETAS) for stove installation.
Explanation of how to regulate heat output using air controls and fuel loads.
Details on the product warranty, coverage, and exclusions.
Information on where to obtain spare parts for the stove.
Clarification on whether stove doors can be left open during burning.
Reasons for a stove smoking when lit, including draught and ventilation.
Guidance on the initial 'run-in' process for curing the stove's paint finish.
Definition and consequences of over firing the stove, including potential damage.
General
