Fireray FD2705R - Page 6

22318.26.01

Amber
Red
Red
Neither
Amber
6.3. Alignment Process Flow Diagram.
After selecting alignment mode
wait until both LED’s stop
flashing
Slowly turn the
thumbwheel in the
same direction
Reverse the
direction of the
thumbwheel
Exit Alignment
Mode and enter the
Operating Mode
LED
flashing?
Slowly adjust a thumbwheel in
one direction and observe the
LED’s
LED
flashing?
For optimum alignment,
deflection of the beam in all four
planes should cause the Amber
LED to flash first
Stop turning the
thumbwheel and
wait for the Red
LED to stop
flashing.
Stop turning the
thumbwheel.
Both
thumbwheels
adjusted?
Repeat the
process for the
other thumbwheel
No
Yes
www.acornfiresecurity.com
www.acornfiresecurity.com