Contact us for assistance: (866) 985-7877 | www.balkenehome.com
ASSEMBLY
7ñ
Attach Head Assembly
C
to Upper Post
F
. Route
Gas Hose
E
down into Upper/Lower Posts
F
/
G
and
align 4 small holes on the Head Assembly
C
with 4 Small
holes in the Upper Post
F
. [HINT: Control knob should be
above decal on post.] Insert the 4 Small Bolts with Lock
Washers
$
through the aligned 4 holes and tighten
securely with the Wrench
(
.
Hardware Used: 4x Small Bolt w/Lock Washer
$
8ñ
¸Á>¿,gÛgUÁµ¦¿NOTE: MAKE SURE TO REMOVE THE
BLUE REFLECTOR TAPE ON REFLECTOR PIECES PRIOR TO
ASSEMBLY!
¸¸gLÓ¿/¡[¿,gtgUÁµ¿¡>g¸¿¸É_¿>¿Lg¿>_¿ÉÁ¿>¸¿¸gg¿¿
_>yµ>¿Á¿Ág¿µyÁ¦¿¿¸UµgѸ¿¸É_¿Lg¿¸gµÁg_¿tµ¿
É_gµg>Á¿Ág¿¡>g¸¿>_¿ÉÁ¸¿¸É_¿Lg¿¸gÓ¿ÁyÁgg_¿¿
¸UµgÑ¿g_¸¦¿Á¿>Ó¿Lg¿gUg¸¸>µÓ¿Á¿tɵÁgµ¿¸g¿>µ_Ñ>µg¿Á¿
>Ñ¿tµ¿¡µ¡gµ¿>ygÁ¿t¿µgtgUÁµ¿¸gUÁ¸¦¿9É¿U>¿É¸g¿
*¡¸¿-UµgÑ_µÐgµ¿Á¿tÉÓ¿ÁyÁg¿¸UµgѸ¿Ug¿>¿¡>g¸¿>Ðg¿
Lgg¿¡µ¡gµÓ¿>yg_¦
Slide two ,g×gU¿³½*>g¶
A
together. Insert one Small Screw½%.¿
Screw on Cap Nut &¿loosely.
Repeat with the other ,g×gU¿³½*>g¶
A
.
Slide ,g×gU¿³½g¿g³½>½
B
onto assembled ,g×gU¿³½Panels¤
Insert one Small Screw and screw on Cap Nut oosely. Repeat
with two more Small Screws and >½ Å¿¶¿Á¿U¡gÁg¿µgÛgUÁµ¿
>¸¸gLÓ¦¿ÉÓ¿ÁyÁg¿>¿¸UµgѸ¿>_¿cap¿nuts.
Hardware Used: 12x Small Screw
%
¿
12x Cap Nut
&
7