Need help?Do you have a question about the Firestone Air-rite 2581 and is the answer not in the manual?
General| Product Type | Air Spring |
|---|---|
| Model | 2581 |
| Material | Rubber |
| Compatibility | Vehicle-specific (check manufacturer's guide) |
| Mounting Type | Bolt-on |
Adherence to safety precautions during installation is crucial to prevent injury.
Never exceed the vehicle's Gross Vehicle Weight Rating (GVWR).
Select a location for the air compressor providing airflow and protection.
Choose an ECU location allowing access for wiring and air line connections.
Route wiring and air lines to avoid damage from sharp edges or heat.
Instructions for connecting air line tubes to hardware using push-to-connect fittings.
Install the 1/8 NPT Push-to-Connect Straight Fitting onto the check valve.
Route the wire harness and make all connections as shown.
Inflate air springs and spray fittings with a leak detection solution.
Confirm secure lines, successful leak test, proper grounding, and air line loops.
Contact 1-800-888-0650 or email for installation assistance.
To Next Page