Firex AD - User Manual

SMOKE ALARM FEATURES
•
This smoke alarm is powered by 120V AC and a 9-volt battery back-up
source. AC/DC smoke alarms offer added protection in the event of a
power failure or a drained battery.
•
Unique power connector prevents interconnection with incompatible
smoke alarms or security systems.
•
This smoke alarm may be interconnected with as many as 11 other Firex
model AD, ADC, PAD or FX1218 smoke alarms, and as many as 6 Firex
model ADH heat alarms for a total of not more than 18 interconnected
devices.
•
Optional tamper-resist feature can serve as a safeguard against tampering.
•
Models AD and ADC have a unique “battery missing” lockout. The smoke
alarm will not attach to the mounting bracket if a battery is not in the bat-
tery pocket.
•
Improperly connected or weak battery signal. The smoke alarm will
sound a short beep about once a minute if the battery is weak or improp-
erly connected.
•
Green and red LED indicator(s) show when the smoke alarm is receiving
AC power, working under normal operation, in alarm, or under false
alarm control.
•
Loud alarm horn—85 decibels at 10 feet—sounds to alert you of
an emergency.
•
This alarm incorporates the internationally recognized horn signal for
evacuation. During alarm mode, the horn produces three short beeps fol-
lowed by a 2 second pause and then repeats. This pattern is somewhat
different than the previous alarm sound, which continually beeped.
•
Test button checks smoke alarm operation. Models ADC and FADC also
feature a False Alarm Control™ which, when activated, quiets unwanted
alarms for up to 15 minutes.
• Model FADC features a latching LED which keeps the initiating alarm Red
LED illuminated until manually reset.
1
Smoke Alarm
®
©1998 Maple Chase Company
120V AC
Ionization
Smoke Alarm
with 9V Battery
Back-up
110-658C
MODELS AD, ADC, PAD MODEL FADC
PLEASE READ AND SAVE THIS MANUAL
Installer: Please leave this
manual with the product.
110-658C 3/8/06 1:21 PM Page 1

Firex AD Specifications

General

Brand	Firex
Model	AD
Category	Smoke Alarm
Language	English

Summary

Smoke Alarm Features

Power and Battery Backup

Smoke alarm powered by 120V AC with 9V battery backup for added protection.

Interconnection and Lockout Features

Unique power connector, interconnection limits, and battery missing lockout.

LED Indicators and Alarm Horn

Description of LED status lights and the loud 85-decibel alarm horn.

Test Button and False Alarm Control

Functionality of the test button and False Alarm Control™ feature.

Important Safety Information

Critical Safety Warnings and Requirements

Covers power requirements, battery use, installation by electricians, and household limitations.

Alarm Limitations and Alerting

Discusses limitations in detecting fires and ensuring all household members are alerted.

Smoke Alarm Placement Guidelines

NFPA and California Fire Marshal Recommendations

Details standard placement requirements for sleeping areas and additional protection areas.

Home Type Specific Placement

Placement for Apartments and Mobile Homes

Specific installation advice for efficiency apartments and mobile homes.

Placement for Single and Multi-Story Homes

Installation advice for single-story and two-story/split-level homes, including basements.

Smoke Alarm Installation Rules

Mounting Location Best Practices

Guidance on ceiling vs. wall mounting and placement relative to corners.

Areas Prohibited for Smoke Alarm Installation

Lists locations such as kitchens, bathrooms, and near vents where alarms should not be placed.

How to Install This Smoke Alarm

Electrical Safety Precautions

Dangers of electrical shock and requirements for qualified electricians during installation.

Step-by-Step Installation Process

Detailed instructions for mounting the alarm, connecting wires, and installing the battery.

Interconnecting Smoke Alarms

Wiring and Limitations for Interconnection

Instructions on using #18 AWG wire and limitations on the number of interconnected alarms.

Understanding LED Indicators

Explanation of what different LED light patterns signify on the smoke alarm.

False Alarm Control and Testing

Using the False Alarm Control Feature

How to quiet unwanted alarms for up to 15 minutes using the test button.

Procedure for Testing the Smoke Alarm

Weekly testing procedure, including checking AC power and testing alarm functions.

Maintenance and Cleaning

Battery Replacement Guidelines

Instructions for replacing the 9-volt battery and recommended battery types.

Cleaning the Smoke Alarm

How to clean the alarm using a vacuum or damp cloth, and warranty voiding warnings.

Repair and Fire Safety Practices

Repair and Warranty Information

Information on attempting repairs (voids warranty) and returning units for service.

Developing Family Escape Plans

Advice on creating and practicing escape plans, and what to do in case of a fire.

Troubleshooting Common Issues

Alarm Not Sounding or Beeping

Solutions for alarms that do not sound when tested or beep intermittently.

Unwanted Alarms and Sound Patterns

Addresses nuisance alarms and the new alarm sound pattern for evacuation.

Warranty Information and Service

Limited Smoke Alarm and Battery Warranty

Details the 5-year smoke alarm and 10-year battery warranty terms and limitations.

Service Return Instructions

Provides addresses for returning smoke alarms or lithium batteries for warranty service.