To Next PageTo Next Page
Need help?Do you have a question about the Firex i4618 Series and is the answer not in the manual?
General| Power Source | 120V AC |
|---|---|
| Sensor Type | Ionization |
| Battery Backup | 9V Battery |
| Hush Feature | Yes |
| Test Button | Yes |
| Alarm Sound Level | 85 dB at 10 feet |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Weight | 0.5 lbs |
| Compliance | UL 217 |
| Tamper Resistant | Yes |
Lists areas where smoke alarms should not be installed to prevent false alarms or malfunction.
Specifies electrical connections, power source, and interconnect wiring standards for proper setup.
Step-by-step guide for attaching the alarm unit to the mounting bracket ensuring correct orientation.
Instructions for activating the tamper-resistant feature to prevent unauthorized removal of the alarm.
Explains the feature to temporarily silence nuisance alarms for up to 8 minutes during non-fire events.
Details the meaning of red and green LED lights indicating alarm status, power, and standby conditions.
Describes the visual alarm memory feature and the red LED indication for Hush mode operation.
Instructions for safely removing the smoke alarm from its mounting bracket for cleaning or servicing.
Guide for correctly installing and replacing the 9V battery for continuous operation and low battery warnings.
Details the warranty terms, coverage, and limitations for specific i4618 and i4718 models.
Outlines the warranty coverage and limitations for the i5000 Series smoke alarms.
