EasyManuals Logo

Firman SPG3000 User Manual

Firman SPG3000
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Manual Insert
QuickOperationGuide
z Unpack generator, check if all the items included.
z Using a funnel to pour the supplied oil into the crankcase, according to the regulated
oil capacity.
z Move generator outside to a flat, level surface, away from doors, windows and vents.
z Remove fuel cap and fill with regulated gasoline fuel by using a funnel.
z Turn fuel valve under tank to ON position.
z Move choke control lever fully to choke position.
z Turn on engine switch.
z Start generator by slowly pulling on the starter rope handle until resistance is felt. Then
pull cord rapidly to overcome compression to start the engine.
z Slowly move choke control lever fully to the running position as the engine warms.
z Plug in items to be powered, using only grounded extension cords.
Do not overload generator or electrical cords.
z Before shutting engine off, unplug all electrical loads.
z Let engine run for 2 minutes.
z Turn engine switch off.
z Turn fuel valve off.
z If generator is to be stored for longer than 30 days, refer to the owner’s manual for
further instructions.
ITEMS INCLUDED
Items Description
Owner’s manual Yes No
Manual insert Yes No
Generator Yes No
Spark plug wrench Yes No
Portability kit According to different model
12VDC charging cable According to different model
If items are missing or damaged, please contact your dealer.
- 3 -

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Firman SPG3000 and is the answer not in the manual?

Firman SPG3000 Specifications

General IconGeneral
BrandFirman
ModelSPG3000
CategoryPortable Generator
LanguageEnglish

Related product manuals