EasyManua.ls Logo

Firman 9350 Starting Watts - User Manual

Firman 9350 Starting Watts
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RD9000E
OWNERS MANUAL
®
Read all safety precautions and instructions carefully
before operating equipment.
Ensure engine is stopped and level before performing
any maintenance or service.
IMPORTANT:
Record product information to reference when ordering parts or
obtaining warranty coverage.
Specification:
Serial Number:
Purchase Date:
www.firmangenerators.com
DUAL FUEL GENERATOR
9350 Starting Watts/7500 Rated Watts (GAS)
8400 Starting Watts/6700 Rated Watts (LPG)

Questions and Answers

  • J
    Jacob TaylorAug 10, 2025
    Why my Firman Portable Generator will not start?
    • E
      Elizabeth PrinceAug 10, 2025
      If your Firman Portable Generator won't start, it might be due to several reasons: * The generator could be out of fuel, in which case you should add fuel. * There might be a faulty spark plug, which requires a replacement. * The unit might be loaded during start-up; remove the load from the unit.
  • S
    Sara FryeAug 15, 2025
    How to fix a Firman 9350 Starting Watts that will not start electrically?
    • M
      Matthew BarrAug 15, 2025
      If your Firman Portable Generator will not start electrically, it may be due to a dead battery. Recharge the generator battery. Alternatively, the battery switch might be in the “OFF” position; turn the battery switch to the “ON” position.
  • S
    smithjeffreyAug 20, 2025
    What to do if my Firman 9350 Starting Watts shuts down during operation?
    • R
      Robert WileyAug 21, 2025
      Your Firman Portable Generator might shut down during operation because it is out of fuel. Refill the gasoline tank or LPG cylinder. Another reason might be low oil level. Refill the crankcase to the proper level and place the generator on a flat, level surface.
  • D
    Denise JohnsonAug 26, 2025
    Why does the circuit breaker keep tripping on my Firman 9350 Starting Watts?
    • S
      shieldswilliamAug 26, 2025
      If your Firman Portable Generator is experiencing repeated circuit breaker tripping, the cause may be overload. Review the load and adjust it. Also, it could be due to faulty cords or devices. Check for damaged, bare, or frayed wires and replace any defective devices.
  • B
    Brittany WarrenAug 30, 2025
    What causes a Firman 9350 Starting Watts Portable Generator to overheat or not supply enough power?
    • M
      Maria KentAug 30, 2025
      If your Firman Portable Generator cannot supply enough power or is overheating, it might be overloaded. Review the load and adjust it. Insufficient ventilation could also be the cause. Check for air restrictions and move the generator to a well-ventilated area.
  • B
    Brian SmithSep 4, 2025
    How to troubleshoot no AC output on a Firman 9350 Starting Watts Portable Generator?
    • J
      Jeffrey SilvaSep 4, 2025
      If there is no AC output from your Firman Portable Generator, check all connections to ensure the cable is properly connected. Replace any defective connected devices. Reset the circuit breaker if it is open. Inspect and tighten any loose wiring connections.

Firman 9350 Starting Watts Specifications

General IconGeneral
Starting Watts9350
Running Watts7500
Fuel TypeGasoline
Engine Type4-Stroke
Start TypeElectric and Recoil
Outlets1 x 120/240V 50A (14-50R)
EngineFirman OHV
Outlet Types5-20R, L5-30R, 14-50R

Related product manuals