To Next PageTo Next PageWhy does my Firman Portable Generator engine shut down when running?
Your Firman Portable Generator might shut down while running due to: * Lack of fuel, in which case you should fill the fuel tank. * A dirty air cleaner, which requires cleaning or replacement. * Low oil level, requiring you to fill the crankcase to the proper level or place the generator on a level surface.
What causes a Firman Portable Generator engine to lack power?
A Firman Portable Generator engine may lack power if: * The load is too high. * The air filter is dirty, so replace the air filter. * The fuel filter is clogged or dirty, so clean or replace the fuel filter. * The spark arrester is clogged, so clean or replace the spark arrester.
What to do if my Firman P08003 Portable Generator engine bogs down when a load is connected?
If your Firman Portable Generator engine runs well at no-load but bogs down when loads are connected, consider these possibilities: * There might be a short circuit in a connected load; disconnect the shorted electrical load. * The generator may be overloaded. * The fuel filter may be clogged or dirty; clean or replace the fuel filter.
Why does my Firman Portable Generator engine hunt or falter?
If your Firman Portable Generator engine “hunts” or falters, it might be due to a clogged or dirty fuel filter. In this case, clean or replace the fuel filter.
Why is the remote start system not working on my Firman P08003 Portable Generator?
If the remote start system on your Firman Portable Generator isn't working, check these: * The remote control may have low batteries; replace them. * You might be exceeding the remote control's range; move closer to the generator (must be no more than 164 feet).
General| Starting Watts | 8000 |
|---|---|
| Fuel Type | Gasoline |
| Run Time at 50% Load | 12 hours |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Wheel Kit | Yes |
| Generator Type | Portable |
| Engine Type | 4-Stroke |
| Starting System | Electric/Recoil |
| Outlets | 4 |
Highlights the critical nature of safety precautions for generator use.
Explains hazard levels (DANGER, WARNING, CAUTION) for user awareness.
Details CO risks and safe generator operation, emphasizing outdoor use.
Lists chemicals requiring specific handling precautions as per California regulations.
Illustrates safe operating areas for carbon monoxide risk mitigation.
Lists unsafe areas to operate the generator to prevent hazards.
Covers safe practices for operating, transporting, and storing the generator.
Key safety steps before and during fueling and starting the generator.
Covers shock, fire, and rotating parts dangers during operation.
Safety guidelines for maintenance, testing, and load management.
Lists all components that should be included in the generator package.
Step-by-step guide for attaching the generator's wheel kit.
Instructions for attaching the generator's handle and support leg.
Detailed steps for correctly connecting the generator's battery cables.
Identifies and labels the main parts and controls of the generator unit.
Explains switches, lights, and the multi-meter on the control panel.
Details power outlets, circuit breakers, and the grounding terminal.
Describes GFCI outlet operation, self-test, and protection features.
Details how the remote start system works and its power consumption.
Guide to program the remote control to recognize and start the generator.
Technical details like wattage, voltage, frequency, engine, and dimensions.
How ambient temperature affects power output and generator performance.
Guidance on selecting and adding the correct engine oil for optimal performance.
Explanation of the automatic engine shutdown feature for protection.
Specifies fuel type, octane, and handling safety precautions.
Adjustments for fueling and performance when operating at higher elevations.
Instructions for safe electrical grounding to prevent shock.
Guidelines for safe connection to a house's electrical system.
Advice on choosing an appropriate operating site to mitigate hazards.
Recommends using surge protectors for sensitive electronic devices.
Step-by-step guide to start the generator using the recoil cord.
Step-by-step guide to start the generator using the electric starter.
Step-by-step guide to start the generator using the remote control.
Instructions for safely connecting electrical loads to the generator.
Steps for manually shutting down the generator after use.
Explanation of the automatic engine shutdown feature for protection.
Steps to safely add loads to avoid damaging the generator.
Overview of maintenance activities and their recommended frequency.
Detailed steps for changing engine oil, including viscosity selection.
Instructions for cleaning and replacing the air filter for optimal performance.
Guide for spark plug checks, cleaning, gap adjustment, and replacement.
Steps to clean the fuel strainer to ensure proper fuel flow.
How to inspect and maintain the muffler and spark arrester.
Steps to clean or replace the spark arrester for performance.
Procedures for cleaning the generator and replacing the battery.
Recommendations for generators not used regularly to prevent starting issues.
Instructions for storing the generator properly to prevent damage.
Solutions for common engine problems like no start or rough running.
Addresses lack of power, engine faltering, and overload issues.
Diagnosing and fixing common remote start system issues.
Visual representation of generator components with part numbers.
Visual representation of engine components with part numbers.
A comprehensive list of all parts for the P08003 generator model.
A detailed list of engine parts with their corresponding part numbers.
Process for identifying and ordering necessary replacement parts.
Details warranty terms, registration requirements, and claim procedures.
Lists specific items and conditions not covered by the generator warranty.
FIRMAN's contact details for customer service and technical assistance.
Owner's duties for maintenance and warranty entitlements.
Explains the scope, duration, and parts covered by the emissions warranty.
Lists specific components included in the emissions control system warranty.
Lists items and conditions not covered under the emissions warranty.
