How to fix a Firman P06702 Portable Generator with no AC output?
If your Firman Portable Generator engine is running but there's no AC output, start by checking the circuit breaker and resetting it. Make sure to check and repair poor connections or defective cord sets. Also, try connecting another device to ensure the one you're using isn't faulty.
What to do if my Firman P06702 Portable Generator won't start?
If your Firman Portable Generator engine won't start, runs roughly, or shuts down, there are several things to check: * Ensure the engine switch and fuel shutoff lever are in the ON position. * Check the oil level and add oil if it's low, or place the generator on a level surface. * Inspect the air cleaner and clean or replace it if it's dirty. * Make sure there is enough fuel and that it is fresh. * Ensure the spark plug wire is connected and the spark plug is in good condition. * If the engine is flooded, wait 5 minutes before trying to start it again. * Clean or replace the fuel filter.
Why does my Firman Portable Generator bog down when I plug something in?
If your Firman Portable Generator's engine runs well without any load but struggles or 'bogs down' when you connect devices, it could be due to several reasons. First, there might be a short circuit in the connected load, so disconnect it. Alternatively, the fuel filter may be clogged or dirty, so try cleaning or replacing it. In other cases, the generator might be overloaded.
General| Brand | Firman |
|---|---|
| Model | P06702 |
| Category | Portable Generator |
| Language | English |
To Next Page
