Manual Insert
Below 32°F ( 0℃ ) …………….SAE 5W-30, 10W-30, or 10W-40
32 to 80°F (0 to 25℃) …………SAE20W, 10W-30, or 10W-40
80 to 95°F (25 to 35℃) ………..SAE30W, 10W-30, or 10W-40
Above 95°F (35℃) ……………..SAE40W, 10W-30
Control Panel Con�iguration
SPG 1800, SPG2500, SPG2900, SPG3000 SERIES
1. Receptacle (The receptacle can be changed according to user’s need in
different distribution area).
2. Volt meter
3. Engine switch/Electric start key
4. AC circuit breaker
5. 12VDC battery charging receptacle
6. DC circuit breaker
7. Power on light
8. Oil warning light
9. Ground terminal
10. Electric starter over current protector.
1. Receptacle 230V/16A.
Total power drawn must keep within nameplate ratings. The current through each
receptacle must be kept within the current rating range.
2. Volt meter.
The Volt meter can indicate AC voltage if operating speed is correct.
3. Engine switch/Electric Start Key
Before stating the engine, push the switch to the position ON ( I ) or turn the key to
- 6 -
SPG 3800, SPG4500, SPG5000, SPG6500, SPG8500
SERIES
To Next Page
Loading...
Need help?
General
