12
Mouse Operations
In addition to operating the system by using the buttons on the remote control, the system can
be operated using a mouse. This chapter provides a quick start overview of the operating
commands available using the mouse functions. For detailed descriptions of the menu options,
see the next chapter Operating Menus.
SURVEILLANCE INTERFACE
Connect the DC 12V power supply adapter to the monitor-DVR to power-up the system.
The power LED on the monitor will light and the surveillance interface will display on the
screen.
If video input is normal, there will be a corresponding channel picture on the surveillance
interface. If a camera is not powered-up, the channel image will display "Video Loss"
instead of live recording. If the system has been programmed to start recording at startup
or record on a time schedule, the system will record automatically.
Double click the left mouse button on any channel to display a full-screen image of that
channel. Double click again to return to quad (4-up) display.
To Next Page
Loading...
