Need help?Do you have a question about the First Alert FA142C and is the answer not in the manual?
General| Sensor Type | Photoelectric |
|---|---|
| Interconnectivity | No |
| Test Button | Yes |
| Low Battery Warning | Yes |
| Alarm Sound | 85 dB |
| Test/Silence Button | Yes |
| LED Indicator | Yes |
| Compliance | UL 217 |
| Power Source | Battery |
| Mounting Type | Wall or Ceiling |
| Type | Smoke Alarm |
Provides an overview of the security system's capabilities, technology, and components.
Details the system's burglary protection modes and the chime feature for door/window status.
Describes the always-on fire protection feature and related sections for guidance.
Explains how alarms are indicated on the keypad and by external sounders.
Explains its use for disarming the system and silencing alarms and trouble sounds.
Details how to arm the entire system for when no one is home or the premises are vacant.
Describes arming perimeter zones while allowing interior movement without triggering an alarm.
Explains arming the entire system without an entry delay for maximum protection.
Explains arming perimeter zones without an entry delay for immediate protection.
Step-by-step instructions for assigning, changing, or deleting user codes.
Explains the special code for silent notification during threats.
Details on programming and deleting the Duress code.
Details the procedure for temporarily excluding specific zones from monitoring.
Describes bypassing multiple zones easily if the feature is programmed.
Explains how to arm perimeter zones while allowing entry/exit door use.
Describes arming perimeter zones without an entry delay for immediate protection.
Details arming the entire system for when the premises are vacant.
Explains arming the entire system for vacant premises with no entry delay.
Procedure for disarming the system and silencing alarms and trouble sounds.
Details the procedure for putting the system into test mode.
Explains trouble indications related to 'Check' and 'Battery' on the keypad.
Lists and describes additional trouble indicators that may appear.
Details further trouble indicators, including communication and battery issues.
Describes the system status and actions during a total power loss.
Instructions on how to silence fire alarms and clear the display.
Steps to manually trigger a fire alarm in an emergency.
How to arm the system in various modes (AWAY, STAY, INSTANT, MAXIMUM).
Procedure to disarm the system using a security code.
Activating panic alarms manually via specific key presses.
Describes sounds and displays for fire alarms.
Describes sounds and displays for burglary/audible emergency alarms.
To Next Page
