–18–
ARMING ALL PROTECTION
WITH ENTRY DELAY ON
Using the
2 AWAY Key
BEFORE ARMING, make
sure all doors and windows are
closed. Refer to
CHECKING
FOR
OPEN
ZONES
on page 13.
Use this key when no one will be staying inside.
1. Enter your security code and press the AWAY key.
2. The keypad beeps twice and displays the armed message. The red ARMED
indicator lights.
3. You may leave through an entry/exit door during the exit delay period without
causing an alarm.
After the exit delay expires, the system arms and sounds an alarm immediately if a
protected window or non-entry/exit door is opened, or if any movement is detected
inside your premises.
You may re-enter through an entry/exit door, but must disarm the
system within the entry delay period to avoid an alarm.
THE AWAY KEY ARMS THE
ENTIRE SYSTEM (INTERIOR AND
PERIMETER), BUT ALLOWS USE
OF THE ENTRY/EXIT DOOR.
TYPICAL DISPLAYS
"ARMED AWAY"
ARME D
***
AWAY
***
YOU MAY EXIT NOW
> The message “you may exit now” changes to
ALL SECURE when the exit delay expires.
ALPHA
AWAY
AC
FIXED-WORD
To Next Page
Loading...
Need help?
General
