To Next PageTo Next Page
Need help?Do you have a question about the First Alert FA1700C and is the answer not in the manual?
General| Brand | First Alert |
|---|---|
| Model | FA1700C |
| Category | Security System |
| Language | English |
Provides an introduction to the security system's features and benefits.
Explains the concept of dividing the security system into multiple partitions.
Details zone assignments and types of protection: zones, fire, and burglary.
Covers CO detection, alarm indication, and alarm memory.
Introduces system scheduling and programmable device timers.
Explains how to access other partitions and the function of master keypads.
Describes the on-screen help system for user instructions.
Details keypad features, display, sounder, and important safety warnings.
Describes the Alpha Keypad's alphanumeric display and custom descriptors.
Illustrates and explains the layout of the primary fire keypad.
Illustrates and explains the layout of the burglary keypad.
Details the functions of keypad buttons, LEDs, and the speaker.
Explains the system's installer-programmed exit and entry delay times.
Covers user security codes, authority levels, and user identification.
Explains the use of a duress code for silent emergency notification.
Details the procedure for arming the system without a code.
Lists and defines the six authority levels and their system permissions.
Outlines rules for managing user authority levels and security codes.
Provides instructions on how to exit user edit modes.
Step-by-step guide for adding new users to the system.
Details how to modify an existing user's security code.
Explains the process for removing a user from the system.
Instructions for using the GOTO command to switch between partitions.
Explains how to arm or disarm multiple partitions simultaneously.
Describes the features and display of a master keypad.
Details the logic for common lobby partitions shared by multiple users.
Explains how user codes affect the common lobby arming/disarming logic.
Procedure to display faulted zones before arming the system.
How to display all programmed zone descriptors using the READY key.
Procedure for intentionally unprotecting specific zones.
Method to bypass all open zones without individual entry.
How to view which zones are currently bypassed.
Procedure for bypassing zones assigned to specific groups.
Procedure for arming the system to protect perimeter zones.
Explains automatic bypassing of certain zones in STAY mode.
Procedure for arming the system with instant perimeter protection.
Procedure for arming the system for full perimeter and interior protection.
Procedure for maximum security arming with no entry delays.
Allows exiting an armed partition without disarming first.
Procedure to disarm the system and silence alarms.
Details how to view and clear the system's alarm memory.
Explains keyswitch indicators and general operation.
Describes procedures for arming using the keyswitch.
Describes procedures for disarming using the keyswitch.
Procedure to activate or deactivate the chime mode for door/window openings.
Explains how to view messages from the monitoring agency or installer.
Instructions on how to manually activate panic functions.
Details the types of panic functions available: silent, audible, personal.
Explains how relays can be used to control external devices like doors.
Procedure for activating a relay via keypad command.
Explains how to use the #70 command to control devices.
Procedure for delaying automatic arming times up to 2 hours.
How to set up temporary overrides for system schedules.
Step-by-step guide for programming temporary schedules for each day.
Explains setting ON/OFF times and days for device control.
Method to set devices for random activation times for security.
Lists action codes for controlling relays instantly.
Lists action codes for instant arming and disarming.
Lists action codes for instant zone bypassing.
Lists action codes for enabling partition opening/closing windows.
Lists action codes for access control functions.
Step-by-step guide to accessing and viewing system event logs.
Procedure to enter Burglary Walk Test mode.
Instructions for testing doors, windows, motion, and smoke detectors.
Emergency procedures to follow when a fire is detected.
Procedure to silence the keypad and potentially fire bells.
System behavior when multiple events occur simultaneously.
Instructions for conducting a fire drill or bell test.
Explains how to interpret system trouble messages and indicators.
Describes system operation during AC power loss and battery backup.
Provides contact information for local dealers and service.
General tips for ensuring the security system's reliability.
Procedure for replacing batteries in wireless sensors and transmitters.
How to silence low battery alert tones at the keypad.
Guidelines for cleaning and general maintenance of system components.
