First Alert FA110C User Manual

BYPASSING PROTECTION ZONES
Using the This key is used when you want to arm your system with one or more
0
3 BYPASS Key
zones intentiOnaily Unprotected. The system must be disarmed first.
j.
Enter your security code and press the BYPASS key.
2.
Enter zone number(s) for the zone(s) to be bypassed. Zone numbers
The system will not must be preceded by a zero (e.g. 04, 06).
allow fire zones to be
3. When finished, the keypad will display a “Bypass” message along
with each bypassed zone number, accompanied by a beep for each.
Wait for these zones to be displayed, to confirm their bypass.
-.
$!,, 4. Arm the system as usual.
(seaJrity cor.le plus OFF)
Bypassed zones are unprotected and will not cause an alarm if
is performed.
violated while your system is armed.
THESE KEYS NOT PRESENT
(n)a
ONALLKEYPADS-
<c
TYPICAL
KEYPAD
TO BYPASS ZONES:
l ENTER CODE
‘* PRESS BYPASS KEY,
l ENTER ZONE Nos.
WAIT FOR
BYPASSED ZONES
TO BE DISPLAYED
BEFORE ARMING
-14-

First Alert FA110C Specifications

General

Brand	First Alert
Model	FA110C
Category	Security System
Language	English