TROUi3LE CONDITIONS
%heck” and
“Battery” Displays
The word CHECK on the keypad’s display, accompanied by a ‘beeping’
at the keypad, indicates a trouble condition rn the system.
To silence the beeping for these conditions, press any key.
1. A display of “CHECK’ and one or more zone numbers indicates
that a problem exists with the displayed zone(s) and requires your
attention. If the CHECK display relates to a fire zone, CALL FOR
SERVICE IMMEDIATELY.
Determine if the zone(s) displayed are intact and make them so if they
are not. If the problem has been corrected, the display can he cleared if
you enter the OFF sequence (user code plus OFF key) twice. If the
display persists, CALL FOR SERVICE IMMEDIATELY.
2. A display of “BAT” with no zone number indicates that the main
standby battery in your control is weak. If this condition persists
for more than one day (with AC present), CALL FOR SERVICE.
I
CHECK
-lYPfCAL =CHUX DWLAY
AC
1
-26-
To Next Page
Loading...
Need help?
General
