First Alert ReadyGuard User Manual

– 5 –
48,&.9,(:2)6<67(0)81&7,216
NOTE:
=
Boxes represent the entering of your 4-digit security code.
SECURITY FUNCTIONS
Checking system status: ----------------------------
STATUS
To arm in STAY mode: ---------------------------
*
+
STAY
To restart exit delay: -------------------------------
STAY
(only if programmed and system armed in Stay mode)
To arm in AWAY mode: --------------------------
*
+
AWAY
To arm with NO DELAY: ------------------------
*
+
AWAY
or
STAY
+
NO DELAY
To arm if Quick Arm is active: -------------------
AWAY
or
STAY
(
hold down for at least 2 seconds)
To disarm the system and silence alarms: ------
+
OFF
To bypass a zone(s): --------------------------------
+
BYPASS
+
2-digit zone number(s)
To turn Chime mode on or off: -------------------
FUNCTION
+
CHIME
*
Security code is not required if Quick Arm is active. Instead, press and hold down the
STAY or AWAY
key.
MESSAGE CENTER
To record a message: -------------------------------
FUNCTION
+
RECORD
To stop recording before end of 20 seconds: ---
OFF
To play back a message: ---------------------------
FUNCTION
+
PLAY
VOLUME ADJUSTMENT
To adjust message playback/announcment volume: ---
FUNCTION
+
VOLUME
+
[3] or [6]
To mute system announcements: -----------------
FUNCTION
+
VOLUME
+
OFF
To restore announcement sounding: ------------
FUNCTION
+
VOLUME
+
[3] or [6]
OTHER FUNCTIONS
** Only the master code can be used to add or delete another user code.
To set the time and date: ---------------------------
+
FUNCTION
+
[63]
To activate or deactivate devices 1-6: ----------
FUNCTION
+
LIGHTS ON
or
LIGHTS OFF
+
device number
To activate or deactivate devices 7 & 8: --------
+
#
+
LIGHTS ON
or
LIGHTS OFF
+
dev. no.
To add a user code: --------------------------------
**
+
CODE
+
user no. (02-08) + user’s code
To delete a user code (except Master Code): --
**
+
CODE
+
user number
(
02-08)
To turn Test mode on: ------------------------------
+
TEST
To turn Test mode off: -----------------------------
+
OFF
To use the defined AUX function: ----------------
Press and hold
AUX
key 2 secs (4 beeps)
+
To send message to pager: -------------------------
Press and hold
AUX
key 2 seconds (4 beeps)

First Alert ReadyGuard Specifications

General

Connectivity	Wi-Fi
Components	motion detector
Mobile App	Yes
Siren	Built-in to base station
Power Source	Battery
Sensor Type	motion detector
Alarm Type	Audible Alarm
Installation	DIY Installation
Certification	UL Certified