First EMV100 800 Series - Page 40

page 40
R
E L E C T R I C R O T A R Y A C T U A T O R
M V 1 2 0 / 3 6 0
for 3-way and 4-way rotary mixing valves and ventilation flaps
Assembly should be carried out by qualified person
TEHNICAL DATA
MANUAL OPERATINGASSEMBLY
WARNING
1.
2.
4.
3.
Pover conection
Consumption
Rotation time
Rotation angle
Micro switch capacity
Electricmotor insulation class
Ambient temperature
Medium temperature
Output torque
Perform connection according to this short instructions.
: controlling the actuator with room thermostat or chronoterm
: possible with OTC controllers in hydronic system to supply require hot
and mixed water
C13-4606-Mv120360a-grey
ON-OFF CONTROL
3 POINT POSITIONING
230 V, 50Hz
3,5 W m ax
105s or 210s
preset to 90°, possibile from 15 to 340°ş
5(1)A, 250 VAC
IP 54
0 ... 50°C
0 ... 130°C m ax
25 Nm
°
ENCLOSED BOLTS AND DISTANCE RINGS
ESBE,
IMT,TEM,
Honeywell
Stadler
CENTRA
Vaillant
Landis
V.I.L.B.
Viesmann
( above 1" )
br own
bl ue
bl ac k
bl ac k1
ye/ gr
PUM P
NEU TRAL
L
N
After long standstill period
Operate manually the
actuator at least twice
to override possible
blocking of the mixing
valve.
Min 2x
RELEASE
TURN
To release actuator turn slightly
axe with a spanner Nr.13
Actuator is supplied with handle in
position as it is shown on drawing.
Before put into operation check that
handle moves in desired area, if not
press and rotate the button to position
MAN and rotate lever for 180ş .
Before first start and before each
heating season, operate the valve
manually with a lever for several
times in order to avoid overload
of the actuator.
Turn the axe of actuator with the
spanner Nr.13 to required position
Push and rotate the button to
position MAN
Release the button and turn it to
pozicion AUTO
black
brown
blue
ye/gr
grey
1
N
L
2
M
435
FIRŠT-ROTOTEHNIKA, s.p., Radegunda 54, SI-3330 Mozirje, SLOVENIJA
tel: +386 3 898 35 00, fax:+386 3 898 35 35, e-mail:info@first.si, http://www.first.si
INSTRUCTIONS FOR MONTAGE AND USE
geprüfte
Sicherheit