10. BACKLIGHTING
LT1: The backlight is activated by pressing any button for
5 seconds within the preset period.
LT2: Press button B for 2 seconds to switch the backlight
on or off.
11. RESET TRIP SETTING
Press button B to select the trip distance, then press and hold
the left button 3 seconds to set the trip distance, timer and
average speed to zero.
12. SPEED COMPARATOR
A “▲” or “▼” appears to the left of the current speed. A “▲”
indicates that you are travelling faster than your average
speed (AV SPD). A “▼” indicates that you are travelling slower
than your average speed.
To Next Page
Loading...