5. TOTAL DISTANCE
Now you can preset the kilometres you have driven so far.
You can take these from your old computer. If these are not
available, you can also start with 0 km.
6. MAINTENANCE SCHEDULE
This program will remind you to replace parts or lubricate the
chain after a predetermined time interval. If the distance is set
to 600 km, (
) the chain tightener blinks each time the total
distance is reached: 600 / 1200 / 1800 etc. Press button A to
stop the blinking of the chain tightener (
).
7. WEIGHT
Enter your current weight in kg or pounds.
8. CO² SAVINGS (CO²/KG)
Now you can enter the CO² consumption of your vehicle per
KM. This is calculated as follows.
Petrol: Consumption per 100 km * 23.8
Diesel: Consumption per 100 km * 26.5
9. SETTING THE TIME
In Clock mode, press the B button to select and the A button
to confi rm the hour and minute settings.
To Next Page
Loading...