11
Warning! This manual contains important information for your
safety as well as operating and maintenance advice. Read all
safety warnings and instructions carefully.
Safety advice
• Observe all safety instructions to avoid damages due to improper use.
Follow all warnings on the product.
• Keep this instruction manual for future reference. Should this product be
passed on to a third party, this instruction manual must be included as well.
• No liability will be accepted for damages resulting from improper use or
non-compliance with these instructions.
• Do not allow children to climb on or play near the product.
• Inspect the product before using it. Do not use it if you spot any bent,
broken, or cracked parts.
• Always remove the bicycle when making adjustments to the working height.
Do not set the height beyond its maximum position.
• Some bicycle manufacturers recommend not clamping thin-walled or carbon
fiber frames. Consult your bicycle‘s manufacturer to find out the suggested
clamping locations.
• To avoid damages to the bicycle, clean the frame tube before clamping.
• The clamp can be rotated 360 degrees, allowing easy access to any parts
of the bicycle. Remove the bicycle before adjusting the angle of the clamp.
• Both clamping jaws have a recess to provide clearance for cables. Make
sure any brake or shift cables are in one of the recesses before clamping,
so as to avoid damages to the bicycle.
• If the saddle or other parts of the bicycle interfere with the rotation of the
cam handle, reverse the clamp so that the cam handle faces the opposite
direction.
• Before use, make sure the bicycle workstand is placed on a stable and
level surface.
• Maximum load-bearing capacity: 35 kg
• Item not suitable for storing the bicycle
• Feet must always be fully extended to prevent tipping
• With electric bikes, always remove the battery beforehand
• Observe the maximum pull-out height (see page 4)
108498_Fischer_50468_Montagestaender_Anleitung.indd 11 05.12.19 11:28
To Next Page
Loading...