ROUTINE MAINTENANCE
Your Fish Hawk requires simple maintenance to keep it working properly. Use the
following schedule to keep your Fish Hawk in top working order:
Item Check Action Interval
Liquid Crystal
Display
Check for dirt and wa-
ter spots on the screen.
Clean with soft cloth. Daily
Transducer Check for marine
growth or deposits on
the face.
Clean with a soft bristle brush. Weekly
Downrigger
Cable
Check for kinks for
fraying.
Replace cable. Daily
Probe Batteries Check for power. Replace if LED is not ashing
inside the probe or if LO BAT
appears on the display.
Daily
Probe O-Rings Check for dirt and
lubrication.
Clean and apply a light coating
of silicone lubricant if dry. Do
not over-lubricate.
Weekly
Probe Paddle
Wheel
Axle clips Press tight against arbor Daily
Probe Check for condensation
in battery cap
Loosen battery cap at the end of
each day
Daily
Probe Batteries Remove batteries for extended
storage
Seasonally
To Next Page
Loading...
