Need help?Do you have a question about the Fisher & Paykel AWF60MD and is the answer not in the manual?
General| Brand | Fisher & Paykel |
|---|---|
| Model | AWF60MD |
| Category | Washer |
| Language | English |
Specifications for voltage, frequency, power consumption, and fuse rating.
Maximum load capacities for various wash programs and models.
Details on door lock time, unlock time, voltage, and current.
Specifications for the heating element, including resistance and wattage.
Resistance value for the NTC temperature sensor.
Pressure range and continuity check requirements for water valves.
Specifications for the drain pump, including voltage, wattage, and flow rate.
Details on motor type, resistance, wash wattage, and spin wattage.
Procedure to enter and execute functional test program 1 for older models.
Steps to advance, exit, or cancel the functional test sequence.
Procedure to enter and execute functional test program 2 for newer models.
Interpreting LED flashing patterns to diagnose faults.
Instructions to enter Service Mode for advanced troubleshooting.
Detailed explanations of error codes (H1-H11) and their causes.
Flowchart for diagnosing a completely non-operational washing machine.
Flowchart for diagnosing issues after the filling step.
Flowchart for diagnosing water intake from the incorrect detergent drawer.
Flowchart for diagnosing the 'No Heat' fault.
Flowchart for diagnosing the 'Not Draining' fault.
Flowchart for diagnosing issues with program selection.
Flowchart for diagnosing spinning problems during the wash cycle.
Flowchart for diagnosing the 'No Water' fault.
Flowchart for diagnosing issues indicated by blinking LEDs.
To Next Page